100 Feet of Vinyl Fence: Materials & Cost
A 100-foot vinyl fence (6 ft tall, posts every 8 ft) needs about 16 posts, 32 bags of concrete, and 13 pre-assembled 8-foot panels. Expect roughly $2,000–$3,500 in materials.
Quick Calculator
Posts
16
Concrete
32
Panels
13
Rails
0
Est. Cost
$2,000–$3,500
Your 100-Foot Vinyl Shopping List
Low-maintenance PVC panels that never need painting or staining. Pre-assembled 8-foot sections snap between routed vinyl posts. Lasts 20-30 years.
At 8-foot spacing, 100 feet divides into 13 sections. That means 14 line and end posts, plus 2 gate posts if you add a walk gate, for 16 posts total. Each post takes 2 bags of 60 lb concrete, so buy 32 bags.
Doing it yourself, material cost is about $2,000–$3,500. Hiring a contractor typically adds $5–$15 per foot in labor, or about $500–$1,500 for this length, for an installed total near $2,500–$5,000. Prices vary by region, so treat these as planning numbers.
Materials List – 100 ft of Vinyl
| Material | Qty | Est. Cost |
|---|---|---|
| Fence Posts (4×4×8 ft) | 16 | $240 |
| Concrete Mix (60 lb bags) | 32 | $192 |
| Panels | 13 | $1,170 |
| Total Estimated Materials | $2,000 – $3,500 |
Other Lengths of Vinyl Fence
100 Feet of Other Fence Types
Recommended Materials
Pressure-Treated Fence Post 4×4×8
Ground-contact rated, ideal for all fence types.
$12 – $18
Cedar Dog-Ear Picket 1×6×6
Naturally rot-resistant, smooth on one side.
$3 – $6
Quikrete 60 lb Fast-Setting Concrete
Sets in 20-40 minutes. No mixing required.
$5 – $7
Post Hole Digger – Fiberglass Handle
Heavy-duty clamshell digger for clean holes.
$35 – $55
Simpson Strong-Tie Fence Bracket
Galvanized L-bracket for rail-to-post connections.
$4 – $8
Decorative Post Cap 4×4
Copper-top cap, fits standard 4×4 posts.
$5 – $12