100 Feet of Chain Link Fence: Materials & Cost
A 100-foot chain link fence (4 ft tall, posts every 10 ft) needs about 13 posts, 26 bags of concrete, and 2 rolls of 50-foot mesh fabric. Expect roughly $800–$1,500 in materials.
Quick Calculator
Posts
13
Concrete
26
Mesh Rolls (50 ft)
2
Rails
10
Est. Cost
$800–$1,500
Your 100-Foot Chain Link Shopping List
Affordable and durable galvanized steel mesh. Ideal for property boundaries, dog runs, and utility areas. Available in 4, 5, and 6-foot heights.
At 10-foot spacing, 100 feet divides into 10 sections. That means 11 line and end posts, plus 2 gate posts if you add a walk gate, for 13 posts total. Each post takes 2 bags of 60 lb concrete, so buy 26 bags. With 1 rails per section you need 10 rails.
Doing it yourself, material cost is about $800–$1,500. Hiring a contractor typically adds $5–$15 per foot in labor, or about $500–$1,500 for this length, for an installed total near $1,300–$3,000. Prices vary by region, so treat these as planning numbers.
Materials List – 100 ft of Chain Link
| Material | Qty | Est. Cost |
|---|---|---|
| Fence Posts (4×4×6 ft) | 13 | $195 |
| Concrete Mix (60 lb bags) | 26 | $156 |
| Rails (2×4×10 ft) | 10 | $70 |
| Mesh Rolls (50 ft) | 2 | $140 |
| Total Estimated Materials | $800 – $1,500 |
Other Lengths of Chain Link Fence
100 Feet of Other Fence Types
Recommended Materials
Pressure-Treated Fence Post 4×4×8
Ground-contact rated, ideal for all fence types.
$12 – $18
Cedar Dog-Ear Picket 1×6×6
Naturally rot-resistant, smooth on one side.
$3 – $6
Quikrete 60 lb Fast-Setting Concrete
Sets in 20-40 minutes. No mixing required.
$5 – $7
Post Hole Digger – Fiberglass Handle
Heavy-duty clamshell digger for clean holes.
$35 – $55
Simpson Strong-Tie Fence Bracket
Galvanized L-bracket for rail-to-post connections.
$4 – $8
Decorative Post Cap 4×4
Copper-top cap, fits standard 4×4 posts.
$5 – $12