100 Feet of Split Rail Fence: Materials & Cost
A 100-foot split rail fence (4 ft tall, posts every 8 ft) needs about 16 posts, 16 bags of concrete, and 39 rails. Expect roughly $1,000–$1,800 in materials.
Quick Calculator
Posts
16
Concrete
16
Rails Only
0
Rails
39
Est. Cost
$1,000–$1,800
Your 100-Foot Split Rail Shopping List
Rustic, open-style fence with horizontal rails slotted through pre-drilled posts. Great for large properties, horse pastures, and country aesthetics.
At 8-foot spacing, 100 feet divides into 13 sections. That means 14 line and end posts, plus 2 gate posts if you add a walk gate, for 16 posts total. Each post takes 1 bags of 60 lb concrete, so buy 16 bags. With 3 rails per section you need 39 rails.
Doing it yourself, material cost is about $1,000–$1,800. Hiring a contractor typically adds $5–$15 per foot in labor, or about $500–$1,500 for this length, for an installed total near $1,500–$3,300. Prices vary by region, so treat these as planning numbers.
Materials List – 100 ft of Split Rail
| Material | Qty | Est. Cost |
|---|---|---|
| Fence Posts (4×4×6 ft) | 16 | $240 |
| Concrete Mix (60 lb bags) | 16 | $96 |
| Rails (2×4×8 ft) | 39 | $273 |
| Total Estimated Materials | $1,000 – $1,800 |
Other Lengths of Split Rail Fence
100 Feet of Other Fence Types
Recommended Materials
Pressure-Treated Fence Post 4×4×8
Ground-contact rated, ideal for all fence types.
$12 – $18
Cedar Dog-Ear Picket 1×6×6
Naturally rot-resistant, smooth on one side.
$3 – $6
Quikrete 60 lb Fast-Setting Concrete
Sets in 20-40 minutes. No mixing required.
$5 – $7
Post Hole Digger – Fiberglass Handle
Heavy-duty clamshell digger for clean holes.
$35 – $55
Simpson Strong-Tie Fence Bracket
Galvanized L-bracket for rail-to-post connections.
$4 – $8
Decorative Post Cap 4×4
Copper-top cap, fits standard 4×4 posts.
$5 – $12