150 Feet of Vinyl Fence: Materials & Cost
A 150-foot vinyl fence (6 ft tall, posts every 8 ft) needs about 22 posts, 44 bags of concrete, and 19 pre-assembled 8-foot panels. Expect roughly $3,000–$5,250 in materials.
Quick Calculator
Posts
22
Concrete
44
Panels
19
Rails
0
Est. Cost
$3,000–$5,250
Your 150-Foot Vinyl Shopping List
Low-maintenance PVC panels that never need painting or staining. Pre-assembled 8-foot sections snap between routed vinyl posts. Lasts 20-30 years.
At 8-foot spacing, 150 feet divides into 19 sections. That means 20 line and end posts, plus 2 gate posts if you add a walk gate, for 22 posts total. Each post takes 2 bags of 60 lb concrete, so buy 44 bags.
Doing it yourself, material cost is about $3,000–$5,250. Hiring a contractor typically adds $5–$15 per foot in labor, or about $750–$2,250 for this length, for an installed total near $3,750–$7,500. Prices vary by region, so treat these as planning numbers.
Materials List – 150 ft of Vinyl
| Material | Qty | Est. Cost |
|---|---|---|
| Fence Posts (4×4×8 ft) | 22 | $330 |
| Concrete Mix (60 lb bags) | 44 | $264 |
| Panels | 19 | $1,710 |
| Total Estimated Materials | $3,000 – $5,250 |
Other Lengths of Vinyl Fence
150 Feet of Other Fence Types
Recommended Materials
Pressure-Treated Fence Post 4×4×8
Ground-contact rated, ideal for all fence types.
$12 – $18
Cedar Dog-Ear Picket 1×6×6
Naturally rot-resistant, smooth on one side.
$3 – $6
Quikrete 60 lb Fast-Setting Concrete
Sets in 20-40 minutes. No mixing required.
$5 – $7
Post Hole Digger – Fiberglass Handle
Heavy-duty clamshell digger for clean holes.
$35 – $55
Simpson Strong-Tie Fence Bracket
Galvanized L-bracket for rail-to-post connections.
$4 – $8
Decorative Post Cap 4×4
Copper-top cap, fits standard 4×4 posts.
$5 – $12