150 Feet of Post & Rail Fence: Materials & Cost
A 150-foot post & rail fence (4 ft tall, posts every 8 ft) needs about 22 posts, 22 bags of concrete, and 57 rails. Expect roughly $1,200–$2,250 in materials.
Quick Calculator
Posts
22
Concrete
22
Rails Only
0
Rails
57
Est. Cost
$1,200–$2,250
Your 150-Foot Post & Rail Shopping List
Simple, ranch-style fence with smooth or rough-sawn rails between posts. More finished look than split rail. Popular for horse properties and acreages.
At 8-foot spacing, 150 feet divides into 19 sections. That means 20 line and end posts, plus 2 gate posts if you add a walk gate, for 22 posts total. Each post takes 1 bags of 60 lb concrete, so buy 22 bags. With 3 rails per section you need 57 rails.
Doing it yourself, material cost is about $1,200–$2,250. Hiring a contractor typically adds $5–$15 per foot in labor, or about $750–$2,250 for this length, for an installed total near $1,950–$4,500. Prices vary by region, so treat these as planning numbers.
Materials List – 150 ft of Post & Rail
| Material | Qty | Est. Cost |
|---|---|---|
| Fence Posts (4×4×6 ft) | 22 | $330 |
| Concrete Mix (60 lb bags) | 22 | $132 |
| Rails (2×4×8 ft) | 57 | $399 |
| Total Estimated Materials | $1,200 – $2,250 |
Other Lengths of Post & Rail Fence
150 Feet of Other Fence Types
Recommended Materials
Pressure-Treated Fence Post 4×4×8
Ground-contact rated, ideal for all fence types.
$12 – $18
Cedar Dog-Ear Picket 1×6×6
Naturally rot-resistant, smooth on one side.
$3 – $6
Quikrete 60 lb Fast-Setting Concrete
Sets in 20-40 minutes. No mixing required.
$5 – $7
Post Hole Digger – Fiberglass Handle
Heavy-duty clamshell digger for clean holes.
$35 – $55
Simpson Strong-Tie Fence Bracket
Galvanized L-bracket for rail-to-post connections.
$4 – $8
Decorative Post Cap 4×4
Copper-top cap, fits standard 4×4 posts.
$5 – $12