Fence Calculator for 350 Feet of Fencing
Planning a 350-foot fence? Below you'll find the exact materials you need—posts, pickets, concrete, and rails—plus estimated costs for every major fence type. Adjust the calculator to match your project.
Quick Calculator
Posts
47
Concrete
94
Pickets
1120
Rails
132
Est. Cost
$5,250–$8,750
What You Need for 350 Feet of Fence
A 350-foot wood privacy fence (the most popular residential choice) requires 47 posts set every 8 feet, 94 bags of 60-pound fast-setting concrete, approximately 1120 pickets (3.5-inch width with 1/4-inch gaps), and 132 horizontal rails. Material costs typically range from $5,250 to $8,750.
If you prefer a more affordable option, chain link fencing for 350 feet uses 38 posts with 10-foot spacing and 7 rolls of galvanized mesh, costing $2,800–$5,250. Vinyl panels offer a low-maintenance alternative at $7,000–$12,250 with 44 pre-assembled panels.
For a DIY project of this size, plan on roughly 6 days of work. Renting a two-person power auger ($50–$75/day) cuts digging time in half compared to a manual post hole digger.
Materials List – 350 ft of Wood Privacy
| Material | Qty | Est. Cost |
|---|---|---|
| Fence Posts (4×4×8 ft) | 47 | $705 |
| Concrete Mix (60 lb bags) | 94 | $564 |
| Rails (2×4×8 ft) | 132 | $924 |
| Pickets | 1120 | $4,480 |
| Total Estimated Materials | $5,250 – $8,750 |
Recommended Materials
Pressure-Treated Fence Post 4×4×8
Ground-contact rated, ideal for all fence types.
$12 – $18
Cedar Dog-Ear Picket 1×6×6
Naturally rot-resistant, smooth on one side.
$3 – $6
Quikrete 60 lb Fast-Setting Concrete
Sets in 20-40 minutes. No mixing required.
$5 – $7
Post Hole Digger – Fiberglass Handle
Heavy-duty clamshell digger for clean holes.
$35 – $55
Simpson Strong-Tie Fence Bracket
Galvanized L-bracket for rail-to-post connections.
$4 – $8
Decorative Post Cap 4×4
Copper-top cap, fits standard 4×4 posts.
$5 – $12